Single Family New Construction

Insulation

Insulation for New Home Construction

State and local building codes typically include minimum insulation requirements, but your energy-efficient home will likely exceed those mandates. To optimize energy efficiency, you should also consider the interaction between the insulation and other building components.

Install proper insulation in the beginning, not later.

Adding insulation during construction is more cost-effective than retrofitting it after the house is finished. If you are unsure of the most effective insulation for your space, talk with one of our professional insulation salesmen today!


What are the most important areas to insulate your in your home?

When retrofitting your home, certain areas are high-priority insulation zones.

These include:

Attic: The attic is a major culprit for heat loss in your home. In winter, warm air rises and can escape through your attic, while in summer, heat from the sun can turn your attic into an oven, radiating heat into your living space. Insulating your attic is a key step toward maintaining a comfortable home temperature year-round.

Walls: Did you know that up to 35% of heat loss in your home occurs through the walls? Insulating your walls effectively traps heat inside in the winter and repels heat in the summer, making your home more energy-efficient and comfortable.

Floors: Ever walked across a cold floor in the middle of winter? Not fun. While they’re not as crucial as attics or walls, insulating floors, especially those above unheated spaces like garages or basements, can help enhance your home’s overall comfort. Spraying your floor joists with closed-cell foam can also improve those pesky squeaks as you walk across your floor.

Basement or crawl space: These areas are often neglected, but insulating them comes with many benefits. Depending on your area, different codes may apply to the basement walls and crawl spaces. Insulating your basement or crawl space walls will reduce drafts and help maintain consistent temperature in your home. Adding a vapor barrier in your crawl space will also help prevent moisture buildup.

Batt / Basic

Annual Savings from Proper Insulation: $0 (based on 1500 ft² rambler with $250/mo utilities)

Batting is a fiberglass blanket that comes in various densities, widths, and lengths and is cut to fit the space in the framing of walls and ceilings. It is typically used in entry-level homes and at less-than-optimal levels.

  • Most common
  • Lowest cost
  • Easy to install
  • R-Values from 8-38
  • Noise control for walls, ceilings, and floors
  • Fire resistant

Blown Fiberglass / Better

Annual Savings from Proper Insulation: $600 (20% savings) (based on 1500 ft² rambler with $250/mo utilities)

Blown-in insulation, using either cellulose or fiberglass, is applied to frame cavities using compressed air. This application allows the insulation to completely fill in all nooks and crannies whereas batt insulation may allow energy loss.

  • Quick and easy installation.
  • Fills the entire cavity.
  • More efficient – higher r-value per inch.
  • Fire retardant & fire resistant.
  • Excellent sound barrier.


Closed-Cell Spray Foam / Best

Annual Savings from Proper Insulation: $1,200 (40% savings) (based on 1500 ft² rambler with $250/mo utilities)

SPF, Closed-Cell Foam is the most advanced insulation material. The high-density foam is sprayed onto surfaces and hardens immediately to form a seamless bond with building components and completely seals the building envelope to create a structurally sound, uniform, air-infiltration barrier that also blocks moisture (no mold or rot), bugs, rodents, dirt, allergens, and noise. Foam is most commonly used in conjunction with batt and/or blown-in insulation to provide an optimal solution that can save homeowners up to 40% on their energy bills, ensuring a quick return on the investment and $1,000s in savings.

  • Most efficient with r-value of 6.0 per inch
  • Completely seals building envelope from air, moisture, sound, and pests
  • Increased structural strength
  • Better indoor air quality
  • Eco-friendly (VOC-free and zero ozone depletion)
  • Applied to all construction materials


Benefits of proper insulation:


  • Reduce your heating and cooling bills.
  • Leave the noise outside and keep it quiet inside.
  • Extend the life of your heating/cooling equipment.
  • Reduce the likelihood of water and mold issues.
  • Take advantage of tax credits & rebates.
  • Protects your home against Mother Nature.

Certified Professionals

We pre-screen and regularly review our contractors so you can confidently hire the right pro.